Ever look at your Mossberg Shockwave and think, “This thing is awesome, but it could be even better?” You are not alone! The Shockwave is a powerhouse right out of the box, but customizing it unlocks its true potential. Finding the perfect accessories, though, can feel like navigating a maze. Should you focus on lights, grips, or maybe a better sighting system?
Many owners face the same challenge: too many choices lead to confusion and wasted money on gear that doesn’t fit right or perform when you need it most. You want reliable upgrades that enhance safety and handling without cluttering your compact shotgun. We understand that frustration. You need clear advice on what truly works.
This guide cuts through the noise. We will break down the best, most practical Mossberg Shockwave accessories available today. By the end of this post, you will know exactly which upgrades deserve a spot on your firearm, making it perfectly suited to your needs.
Top Mossberg Shockwave Accessories Recommendations
- Made of Quality Strong & Stretchable composite rubber.
- The single finger groove grip provide additional stability and great traction.
- Non-slip texture with palm swells for fit sung and control.
- Features a thicker padded area to give the palm of your hand better protection from recoil.
- Before installation please soaked the grip in hot water (5 minutes or so) then added a bit of dish soap to the water stirred it around to make sure the inside of the grip had just a little soap on it then worked it on quite easily WITHOUT taking the grip off.
- Built for use with Mossberg 500, 590, and Shockwave Series shotgun models
- Not compatible with Mossberg 500 Bantam, Mossberg 500 Combo, Mossberg 500 Flex Models or models where the pump action extends past the receiver when pumped. See attached infographic before purchasing. Pre-1997 Mossberg shotguns were manufactured with a different mounting hole pattern and will require 6x48TPI screws (not included).
- Shell holder available in two sizes - 12 gauge saddle accomodating up to six 12 gauge shells and 20 gauge saddle accomodating up to seven 20 gauge shells
- Rail mount allows for the mounting of Picatinny or Weaver standard scopes, red dots, or other optics
- Installs via included set screws into the Mossberg factory mounting holes with no additional gunsmithing required
- Side saddle shell holder for use with most Mossberg 590/Shockwave Series shotgun platforms
- Not compatible with extended pump Mossberg models - if the pump action extends past the shotgun receiver when pumped, the saddle will interfere with the action. Not compatible with Maverick 88 Bantam, Mossberg 500 Bantam, Mossberg 500 Combo,or Mossberg 500 Flex Models. Please check the action of your shotgun before purchasing. Not compatible with other shotgun models.
- Unit installs into the pin holes on the side of the receiver with no additional gunsmithing required
- Accomodates up to six 12 gauge shotgun shells
- All Monstrum products are backed by a lifetime warranty
- The 69602 TL-Racker is designed exclusively and solely for Mossberg Shockwave 12 Gauge with 6 3/4" action slide only; Any other fitment or compatibility must be verified by Mossberg and Streamlight before purchase
- Not compatible with Shockwave models with Picatinny rails due to the mag tube being a different size
- High-Performance Output: Delivers 1,000 lumens, 20,000 candela, and a 283-meter beam for reliable visibility in home defense, tactical, and duty environments
- Integrated Forend Design: Replaces factory forend and provides an ergonomic grip with a long ambidextrous switchpad for momentary or constant-on activation without shifting hand placement
- Built Streamlight Tough: Reinforced polymer body, IPX7 waterproof, impact-resistant, and engineered to withstand repeated 12-gauge recoi
- Extremely Durable & Solid: made of quality hard-anodized aluminum with a nice black oxide finish.
- Fits all pump models: 500 / 600 / 835 / 535 / 505 / 510 / 590 & Shockwave
- Fits all bolt action Models: 9200 390 / 395 /485 / 490 / 495
- Reversible Design: installs in either direction, larger than stock for easier No-Slip operation
- Comes with a Cap Screw & Allen Key. If you have any quality problems, please feel free to contact us, we'll reply you within 24 hours, and offer you the best solution.
- The Tactical Grip Glove, developed specifically for the Mossberg Shockwave and Remington Tac-14
- This slip-on grip is easy to install and offers much better control as well as reducing recoil of the Shockwave and Tac-14.
- The grip features a single finger positioning groove and non-slip texturing.
- Features a thicker padded area to give the palm of your hand better protection from recoil.
- Dedicated picatinny rail mount built specifically for Mossberg shotgun platforms. Compatible with Mossberg 500/590/835/930/Shockwave shotgun models. Check compatibility chart before purchasing.
- Grimlock Series optic mounts offer a sleeker and more distinctive design than our previous generation mounts, contoured to the curvature of your receiver
- Can be used to mount scope rings, mounts, or optics using the Picatinny 1913 or the Weaver mounting standard
- Installs directly into the factory mounting holes on the Mossberg receiver using the included set screws. No additional hardware required
- All Monstrum products come are backed by a lifetime guarantee
- Adjustable Length: Length of 2 points sling is 39" to 50" , adjustable rope is designed to meet most people’s different need
- 550 Paracord Sling: The 550 paracord shotgun sling is made of high-strength polyester and polypropylene, to build a enduring 550 paracord, which can hold up to 550 pounds. It doesn't slide off like a leather sling and doesn't overstretched like neoprene
- Nylon Webbing Strap: Webbing form for enduring use while smooth part of the 550 paracord gun sling for easy operation
- Tri-lock Swivels: With tri-lock swivels providing secure locking, you can put on or take off this rifle sling in an easy and comfortable way
- Multifunctional Use: The 550 paracord two point sling is suitable for hunting, climbing, shooting and adventure. It can be transfer into tourniquet, shoestrings, belts, shooting, and hunting accessories in emergency
The Ultimate Buying Guide for Mossberg Shockwave Accessories
The Mossberg Shockwave is a popular short-barreled shotgun. It is great for home defense. To make your Shockwave even better, you need the right accessories. This guide helps you choose the best add-ons.
Key Features to Look For
When shopping for Shockwave accessories, look for a few main things. These features will improve how you use your firearm.
- **Ergonomics:** Accessories should feel good in your hand. Good grips and forends make shooting easier.
- **Reliability:** The accessory must work every time. Cheap parts can break under stress.
- **Ease of Installation:** You want accessories that install quickly. Simple tools or no tools should be needed for most upgrades.
- **Capacity:** Some magazines or shell holders increase how many rounds you carry.
Important Materials Used in Accessories
The material an accessory is made from matters a lot. It affects strength and weight.
Most high-quality accessories use strong materials. **Aircraft-grade aluminum** is common for rails and mounts. It is light but very tough. Polymer, like high-density nylon, is used for grips and forends. Polymer resists impact and moisture well. Always check the product description for the material used. Better materials usually mean a longer-lasting product.
Factors That Improve or Reduce Quality
Good design makes a big difference in accessory quality.
Factors That Improve Quality
- **Tight Tolerances:** Parts that fit perfectly work better. Poorly made parts wiggle loose.
- **Surface Finish:** Good finishes, like anodizing on aluminum, stop rust and scratches.
- **Brand Reputation:** Trusted brands invest more in research and quality control.
Factors That Reduce Quality
Cheap plastic parts break easily. Thin metal bends. If an accessory feels flimsy when you hold it, it probably is. Poorly finished edges can scratch your shotgun or hurt your hands. Avoid parts that do not perfectly match the Shockwave’s design.
User Experience and Use Cases
Think about how you plan to use your Shockwave. This determines which accessories you need most.
Home Defense Scenarios
For quick defense inside the home, you need fast access to shells. A good **side saddle shell holder** keeps ammo right on the gun. A bright **weapon light** helps you identify targets safely in the dark. These items improve speed and safety.
Range Shooting and Handling
If you shoot at the range often, comfort is key. A better **forend** often gives you a better grip, which helps control recoil. Some users add a **shock-absorbing brace** for a more stable hold, though this depends on local laws.
Ultimately, the best accessory solves a problem for you. If you struggle to see at night, get a light. If you reload slowly, get a carrier. Choose accessories that make shooting your Shockwave safer and more effective for your needs.
10 Frequently Asked Questions (FAQ) About Mossberg Shockwave Accessories
Q: Are Shockwave accessories the same as standard shotgun accessories?
A: No. The Shockwave has a unique, shorter design. You must buy accessories specifically labeled for the Mossberg Shockwave or 590/500 models that confirm compatibility.
Q: What is the most popular first upgrade for a Shockwave?
A: Many people first upgrade the **side saddle** for extra ammo capacity or add a **weapon light** for better low-light use.
Q: Will adding too many accessories make my Shockwave too heavy?
A: Yes, heavy items like large lights or extended tube extensions can make it heavy. Choose lightweight materials like aluminum or polymer to keep the weight down.
Q: Do I need special tools to install a new grip?
A: Most grip upgrades require basic tools like a screwdriver or a small wrench set. Always check the instructions that come with the part.
Q: Can I add a vertical foregrip to my Shockwave?
A: Adding a vertical foregrip often changes the classification of the firearm under federal law (making it an “Any Other Weapon” or AOW). Check your local and federal laws very carefully before installing one.
Q: What material is best for a Shockwave sling?
A: A durable nylon or heavy-duty synthetic material sling works best. Look for strong metal or polymer QD (Quick Detach) points for secure attachment.
Q: How do I clean accessories like lights or optics?
A: Use a soft, damp cloth for general cleaning. For lenses on lights or optics, use a specific lens cleaner and a microfiber cloth to avoid scratching the surface.
Q: Do aftermarket sights improve accuracy?
A: Yes, many people find bright fiber optic sights or simple red dot optics much faster to use than the factory bead sight, especially for quick target acquisition.
Q: What should I look for in a quality shell carrier?
A: Look for a carrier that holds shells securely but releases them easily when needed. Elastic loops wear out; solid polymer or Kydex carriers often last longer.
Q: Are budget-brand accessories worth buying?
A: Sometimes, but be cautious. If the price seems too low, the material or fit is likely poor. For critical safety items, spend a little more on a proven brand.